Gantry Crane Track - HBXG 955T Wheel Loader – Xuanhua
Gantry Crane Track - HBXG 955T Wheel Loader – Xuanhua Detail:
HBXG 955T Wheel Loader
● Features
1. Equipped with WeiChai Engine
2. 2 forward & 1 reverse power shift transmission
3. Combined seal cylinder obtains high seal performance and more reliability
● Overall Dimension
Length(with bucket on ground) | 8100(mm) |
Width(to outside of wheels) | 2800(mm) |
Bucket width | 2946(mm) |
Height(To the top of the cab) | 3450(mm) |
Wheel base | 3100(mm) |
Tread | 2200(mm) |
Min. ground clearance | 450(mm) |
● Main Technical Specification
Rated load | 5000(Kg) |
Operating weight | 16500(15%)KG |
Rated bucket capacity | 3m 2.2-4.5 (m) |
Max. breakout force | 165kN |
Max. dump clearance | 3140(mm) |
Dump reach | 1180(mm) |
Dump angle at any position | 450 |
Digging depth(with bucket bottom horizontal) | 27(mm) |
Min. turning radius | |
(1) Outside of bucket | 6689(mm) |
(2) Outside of rear wheel | 5970(mm) |
Pivot angle frame | 38° |
Oscillating angle of rear axle | +11° |
Lifting time of bucket | 6.2(sec.) |
Lowering time of bucket | 3.8(sec.) |
Dumping time | 1.8(sec.) |
● Traveling speed(Km/h)2 forward and 1 reverse
Gear | 1st | 2nd |
Forward | 11.7 | 40.3 |
Backward | 15.9 |
● Diesel engine
Model | Weichai Engine WD10G220E23 |
Type | Direct injection. Turbocharged. Water cooling |
Rated output | 162 kW |
Inter-bore of cylinder/Stroke | 126/130(mm) |
Total exhaust of cylinder | 9.726(L) |
Model of starting motor | KB-24V |
Power of start motor | 7.5(KW) |
Voltage of starting motor | 24(V) |
Rated speed | 2000(r/min) |
Max. Torque | >900(N.m) |
Starting type | Electric |
Min. specific fuel consumption | <220g/Kw.h) |
Engine specific oil consumption | 0.95-1.77(g/Kw.h) |
Net weight | 1000(Kg) |
● Transmission System
Hydromedia Transmission | |
Model | ZL50B-012 |
Type | 4-elements.single stage |
Torque ratio | 4 |
Cooling type | Pressure oil circulating |
Type of transmission case | power shift, spur gear constant-mesh |
Gear shift position | 2 Forward and 1 reverse gears |
Axle and Tire | |
Type of main reducer | spiral bevel gear |
Gear ratio of main reducer | 4.625 |
Type of final reducer | Single stage planetary, single stage |
Gear of ratio of final reducer | 4.929 |
Gear ratio | 22.795 |
Max. drawing force | 150kN |
Size of tire | 23.5-25-16PR |
● Working Device Hydraulic System
Model of oil pump | JHP2080S System |
pressure | 18MPa |
Model of Mutichannel conversion valve | GDF-32-YL18 |
(D*L)Dimension of lifting cylinder | 160*90*810(mm) (D*L) |
Dimension of tilting cylinder | 180*90*563(mm) |
● Steering System
Type | Middle articulated frame. Full-hydraulic Steering |
Model of steering pump | JHP2080S |
Model of redirector | TLF1-E1000B+FKB6020 |
Model of priority valve | YXL-F250F-N7 |
System pressure | 16MPa |
Dimension of steering cylinder | 90*400 (mm) |
● Brake System
Type of traveling brake | Caliper disc brake, Air over oil activate 4 wheel brake |
Air pressure | 6-7.5(kgf/cm2) |
Type of parking brake | Hand brake Flexible shaft control clamp brake |
● Oil Capacity
Fuel(diesel) | 250L |
Engine lubricating oil | 24L |
Oil for converter and gear box | 45L |
Oil for hydraulic system | 180L |
Oil for driving axlesF/R | 36L |
Oil for final reducer | 14L |
Oil for brake system | 3L |
Product detail pictures:
Related Product Guide:
Our target is always to satisfy our customers by offering golden support, superior value and high quality for Gantry Crane Track - HBXG 955T Wheel Loader – Xuanhua , The product will supply to all over the world, such as: Hungary, Lesotho, Karachi, If you are for any reason unsure which product to select, do not hesitate to contact us and we are going to be delighted to advise and assist you. This way we are going to be providing you with all the knowledge needed to make the best choice. Our company strictly follows "Survive by good quality, Develop by keeping good credit. " operation policy. Welcome all the clients old and new to visit our company and talk about the business. We have been looking for more and more customers to create the glorious future.
By Eric from Senegal - 2018.07.26 16:51
The sales manager is very patient, we communicated about three days before we decided to cooperate, finally, we are very satisfied with this cooperation!
By Danny from Jordan - 2018.11.11 19:52
Write your message here and send it to us