Crane With Tracks - Z140 Track Loader – Xuanhua
Crane With Tracks - Z140 Track Loader – Xuanhua Detail:
Z140 Track Loader
● Features
The Track loader Z140 is applied in mining and metallurgical special working conditions, such as high temperature, steel slag road etc.
Diesel engine
Model |
6135K-3S |
Type |
water-cooled. single-row, verntical,4-strok-cycle diesel engine witho”combustion chamber. |
Number of cylinders-bore x stroke |
6-135*l40mm |
Flywheel power |
103kW |
Total displacement |
12L |
Max. torque |
>686.4N.m |
Fuel consumption |
<245gAW.h |
Cooling |
closed circulation, water-cooled |
Starting |
24-volt starter moter |
Steering & braking
Multiple-dise oil steering clutches with starting spring by towing force and hydraulically actuated operation
Oil two-direction floating band brakes with mechanical foot pedals.
The steering and brake of the loader are pedal linkage controlled.
Steering and braking controlled by a fool pedal for each track.The middle pedalprovides braking left and right simultaneousty.
A segment stopping pawl is welded beneath the middle pedal to lock down for parking.
Transmission
Constant mesh with helical gears, coupling sleeve shift with double levers
control mechanism. Travel speed (in theory @ 1800 RPM engine speed):
Gear | 1st | 2nd | 3rd | 4th | 5th |
Forward(km/n) | 2.52 | 3.55 | 5.68 | 7.53 | 10.61 |
Reverse(km/h) | 3.53 | 4.96 | 7.94 | 10.53 |
Undercarriage
Inner beam and outer beam of track roller frame are box-section welded ofchannel and plate steel. The ear part of track roller frames are connected with main frume and final drives, the middle portion are connected with the front bar, thus the nigid suspension construction of the machine is fomed.
The idlers, single and double flange track rollers and carier rollers are mounted with long-service life, well-sealed Duo-Cone floating ring seals consisting of two special alloy cast iron rings and two special”O”rings.
Number of track rollers (each side) |
3single-flanged and 3 double-flanged |
Track shoes |
double grouser shoe |
Pitch |
203mm |
Number of shoes(each side) |
39 |
Width of shoe |
420mm |
Sealed and lubricated track
A sealed lubricating arrangement holds oil between track pin and bushing contact surfaces, so the track pin is surrounded with lubricant to virtually eliminate the wear of pin and bushing and noticeably reduce the track noise. The split master link makes assembly and disassembly of track less time consuming, repair and maintenance much easier.
CAB(weight 0.4t)
The cab with adjustable seat features low noise and wide visible range and contains electrical fan.
Implement
The bucket implement is a general purpose bucket with positive linkage consunuction, consists of bucket, ann link rods, lift cylinders and rilt cylinders.
When the service men work under the under the implement for service, the arm should be lift and locked on the lift position, it can avoid personal injury. The loader has the lock parts to lock parts to lock the implement
Implement specifications
Bucket Capacity |
struck Capacity 1.5m3 heaped capacity 1.8m3 |
Dump Height at Full Lift and 45° Discharge |
hanger 3600mm tip of bucket 2690mm |
Reach 45* Discharge Full Lift |
1280mm |
Max. Digging Depth |
350m |
Roll Back at Full Lift |
45° |
Rated weight |
3.5t |
Operating weight |
17.3t |
Max. drawbar pull |
130.4kN |
Ground pressure(at operating weight) |
75.5kPa |
Grade ability |
straight:30°side:25° |
Hydraulic system of implement
Single-lever control mechanism serves to set bucketvalve and lift arm valve in various states with the implement in diffeent action so as to accomplish any work required.
Pump model |
CB-S112A(counter clockwise) |
System output |
200L/min |
System pressure |
13.73MPa |
Lift arm operating valve |
5-way spool valve with 4positions |
Positions |
Raise, hold, lower. float |
Bucket operating valve |
5. way spool valve with 3 positions |
Positions |
Tilk back. dump, hold |
Product detail pictures:
Related Product Guide:
With state-of-the-art technologies and facilities, strict good quality regulate, reasonable cost, exceptional assistance and close co-operation with prospects, we're devoted to supplying the top benefit for our customers for Crane With Tracks - Z140 Track Loader – Xuanhua , The product will supply to all over the world, such as: Ecuador, Philippines, Philadelphia, Our factory is equipped with complete facility in 10000 square meters, which makes us be able to satisfy the producing and sales for most auto part products. Our advantage is full category, high quality and competitive price! Based on that, our products win a high admiration both at home and abroad.
By Maggie from USA - 2018.12.05 13:53
This company conforms to the market requirement and joins in the market competition by its high quality product, this is an enterprise that have Chinese spirit.
By Alberta from Swansea - 2018.05.13 17:00